正交异性平面内的椭圆孔或裂纹系问题

应用Ｆａｂｅｒ级数展开和各向异性体平面问题复应力函数的方法，对于含有任意个椭圆孔或裂纹的正交异性平面，给出了孔周应力场解或孔附近裂纹应力强度因子解，其特例与前人结果一致．     

稠密流体中双原子分子振动弛豫的非谐性及质量效应

利用分子动力学计算机模拟方法研究了稠密流体中双原子分子的振动弛豫问题，证实了双原产分子的振动弛豫速率随着其非谐性的增大而加快，同时，其速率也随其质量因子的变大而加速。     

动态J积分及Rice J积分一致性比较与分析

首先回顾了动态J积分的发展进程,然后给出了两种常用动态J积分和Rice J积分的数学计算式,并对它们的一致性加以讨论,由此提出一种广义J积分的定义。然后通过算例,基于ANSYS软件,建立平面应变情形下纯I型中心裂纹模型,并利用编写的APDL程序计算了各个J积分,通过结果比较,进一步验证了在动态加载条件下,动态J积分比Rice J积分具有更好的路径守恒性,但仍可以看出它们的取值具有一定的一致性。最后,通过J积分间接法和裂尖位移外推法分别计算裂纹动态应力强度因子,所得结果吻合很好,验证了编写程序的正确性。     

浸没式浮筒对系泊缆松弛-张紧特性的影响研究

为了研究浸没式浮筒对悬链线系泊缆松弛-张紧特性的影响,本文基于集中质量法建立了下端锚固、上端做简谐运动的带浮筒悬链线系缆运动微分方程。运用Newton-Raphson法和Howbolt差分法,求解了系缆的运动特性和动张力值。通过与无浮筒悬链线系泊系统的对比,分析了几种不同参数的浮筒对系泊缆松弛-张紧现象及冲击放大系数两个方面的影响。结果表明:附加一定大小的浸没式浮筒能有效抑制系泊缆松弛-张紧现象的出现,并且减小系缆运动过程中动张力的冲击放大系数;但当附加浮筒的净浮力过大时,在极端海况下,会助长系泊缆上端出现松弛-张紧现象,进而影响系泊物的稳定性。     

压电材料平面应力状态的直线裂纹问题一般解

研究了含直线裂纹系的压电材料平面应力问题单个裂纹和双裂纹问题的封闭解答表明，在裂纹尖端，应力、电场强度和电位移有１／２阶的奇异性并与前人结果比较了产生电场奇异性的物理因素     

用云纹干涉法测量带孔复合材料板应变系数

介绍云纹干涉法在复合材料中应用的一个例子，用云纹干涉法测量带孔复合材料板应变集中系数．     

Step planar extension of polymer melts using a lubricated channel

A technique to do step planar extension on polymer melts has been developed using a rectangular channel with lubricated walls and the linear motor of the Rheometrics System Four rheometer. Using this method we probe the stress relaxation of two polymer melts, a linear low density polyethylene (LLDPE) and a highly branched low density polyethylene (IUPAC X), and compare the step planar extensional data to step shear data. Since a step planar deformation is theoretically equivalent to a step shear in a rotating frame of reference, we expect that the nonlinear modulus for step planar extension should be equivalent to that for step shear. Although we find the time dependence of the stress relaxation modulus to be the same in both shear and planar extension, the strain dependence is surprisingly different for the two experiments.     

主裂纹与微裂纹相互作用问题的有效数值计算方法

提出了平面弹性介质中主裂纹与微裂纹相互作用问题的有效数值计算 方法. 通过把适于单一裂纹的Bueckner原理扩充到含有多裂纹的一般体系，将原问题分解 为承受远处载荷不含裂纹的均匀问题，和在远处不承受载荷但在裂纹面上承受面力的多裂纹 问题. 于是，以应力强度因子作为参量的问题可以通过考虑后者(多裂纹问题)来解决，而 利用提出的杂交位移不连续法，这种多裂纹问题是容易数值求解的. 列举 Cai和 Faber为评价主裂纹与微裂纹相互作用问题的近似方法而列举的算例，说明 该数值方法对分析平面弹性介质中主裂纹与微裂纹相互作用问题既简单又非常有效.     

Flows Resulting from the Incidence of a Discontinuous Wave on a Bottom Step

The solvability of the problem of the flows resulting from the incidence of a discontinuous wave on a bottom step is studied using a single-layer shallow water model. Solutions in which the total energy of the flow is conserved at the step and those in which it is lost at the step are considered. Regions of double and triple hystereses in the obtained self-similar solutions are found. An analogy is drawn with the problem of single-layer flow over a bottom obstacle. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 2, pp. 8–22, March–April, 2006.     

Scaled-boundary method in electroelasticity of thin plates

The paper discusses the scaled-boundary method as applied to electroelastic problems. As an example, the stress-intensity factor is calculated for a thin rectangular piezoelectric plate with an edge crack __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 7, pp. 124–134, July 2006.